Products

Products & downloads

Radioactivity detector, measuring board, free tools and software.

Hardware

Detector

DD6053 — Industrial gamma radioactivity detector

Rugged gamma detector in an IP54 aluminium housing, built around the C6020 measuring board. It measures gamma dose rate or surface contamination and transmits its results using the Dactyle protocol.

Components

  • C6020 measuring board
  • Detector holder and Geiger-Müller tube
  • Communication interface and Dactyle connector
  • High-strength IP54 aluminium housing

Functions

  • Gamma dose rate or surface measurement, transmission via the Dactyle protocol
  • Internal management: detector high-voltage supply, detection thresholds, LED status display, settings, programming mode

Communication

  • Interfaces: RS-485, current loop, RS-232
  • ASCII message exchange, 8 hardware addresses, coded commands and responses
  • Commands: stop transmission, status request, advance tape, reset, send parameters, read signals, channel 1 / channel 2 results
  • Responses: measurements, device status, parameters
  • Protocols adaptable on request, with error recovery

Technical specifications

Measuring range
Gamma, from 10 µSv/h to 100 mSv/h (ZP1313 tube)
Power supply
9–36 V or 1–5 V, consumption < 2 W
Input / output
Isolated digital, max. 100 V / 1 A
Dimensions
190 × 112 × 61 mm
Weight
720 g
Housing
Very strong aluminium, IP54
Temperature
Operating 0 to 60 °C — storage −20 to +80 °C

Request a quote

Circuit board

C6020 — Nuclear measuring board

Versatile interface board: pulse measurement, reporting over an industrial network, DC motor control, analogue measurement. It can also be the heart of a portable monitor or a fixed radioactivity measuring station — it is the board fitted in the DD6053.

Functions

  • Reset (with manual reset)
  • Power supply and high-voltage supply for detectors
  • 3 status LEDs, function selectable by programming
  • 2 isolated opto-coupled inputs, 4 × 5 V digital inputs
  • 2 MOSFET transistor outputs
  • 2 amplified counting inputs, programmable discriminator (comparator + DAC), 16-bit counting
  • Analogue input, temperature measurement of the board and the HV transistor
  • I²C and SPI bus, RS-485 port, optional second port (RS-232, current loop…)
  • Programming connector and double-row expansion connector

Technical specifications

Power supply
1.2 to 5.5 V DC or 9 to 36 V DC
High voltage
50 to 200 V DC (< 0.5 W)
Counting
0 to 100 kHz, gain from 1 to 100, protected inputs
Isolated inputs
0 / 5–12 V
5 V digital inputs
4 × 0–5 V, > 10 kΩ
Transistor outputs
Max. 2 A / 100 V
Analogue input
1 × 0–5 V
Measured temperature
−20 to +85 °C
Communication
RS-485 by default

Block diagram (PDF) Request information

Freeware

Free

Elektor — table of contents

Table of contents of Elektor magazine from 1978 to 2010: filters, keyword search, exports, printing…

Elektor table of contents software

Download (ZIP, 1.3 MB)

Free

DirectoryPrint

Exports the contents of a folder to a text or Excel file.

DirectoryPrint
Free

Analyse File

Displays the contents of any file in hexadecimal.

Analyse File
Free

Splitter & ConvDosAscii

Splitter cuts any file into pieces and then rebuilds it — handy for moving large files. ConvDosAscii converts DOS text files to Windows format.

Freeware other than Elektor is available on request by email.

Sharewares

Shareware

Movies

Film management: from script to distribution, including production, post-production and editing.

Movies software
Shareware

Electronics calculations

Calculation tools for electronics engineers.